Variable pressure mattress for the prevention and treatment of bedsores T01

The mattress for the prevention and treatment of bedsores T01 is suitable for patients at risk of bedsores up to level II. The variable pressure mattress consists of 18 cylindrical, easily replaceable chambers, which are inflated in a variable mode with the help of a compressor. Although this anti-theft mattress system is recommended to be used on another mattress base, it can also be used instead of a mattress if the patient feels comfortable and does not touch the bed base with his body.

• Suitable for use both in healthcare facilities and at home. Recommended for patients who spend more than 15 hours in bed. per day, for those who move little in bed and have an increased risk of bed sores or already have problems with bedsores.
• The anti-breakage properties of the mattress are ensured by changing the pressure in the mattress chambers (cells) on the b-A-b-A principle in a set cycle, i.e. by inflating and deflating every other chamber. In this way, the surface of the skin is stimulated, greater air circulation on the surface of the skin is ensured, the skin "breathes" more easily, blood circulation is stimulated, as a result, the risk of bedsore formation decreases, and skin lesions heal better.

• The mattress base consists of 18 cells that can be easily removed, replaced in case of failure, and also easy to clean and maintain. The cameras are made of high-quality nylon with a thermo-polyurethane coating.
  • The anti-theft mattress has a cover that is resistant to moisture, wires and air, elastic in all directions, which is attached to the base with press studs at the ends of the mattress and Velcro strips on the sides of the mattress. The ends of the mattress have special flaps for tucking under the mattress. The cover can be washed and dried in automatic washing and drying machines.
• The mattress has a quick air release valve CPR, which allows you to quickly deflate the mattress in case of emergency or for storage.
• The mattress compressor has hooks on the back so it can be securely hung on the edge or end of the bed.
• The compressor has an air pressure regulator, the setting position of which is selected depending on the weight of the nurse. The operating cycle time of the compressor is 12 min. The compressor is extremely quiet, its noise level is up to 20 dB, so it does not annoy the patient. The compressor works in variable pressure mode, i.e. inflating all cells to the same pressure or to inflate/deflate them every second.
• The compressor has an acoustic power failure indicator that turns on when the power supply fails.
• The length of the inflated mattress is 200 cm, width 90 cm, height 12 cm. Fits a standard single bed.
• Maximum mattress load 145 kg.

Technical parameters of the mattress:

• Number of cameras (cells): 18 units
• Type of mattress chambers (cells): cylindrical.
• Mattress material: chambers - nylon/TPU, top cover - elastic PU, bottom - PVC
• Fastening the cover with press and velcro strips
• Fixing the mattress: special flaps at the ends of the mattress.
• Dimensions of the inflated mattress: length 200 cm, width 90 cm, height 12 cm.
• Quick Release Valve CPR: Available
• Maximum permitted load: 145 kg
• Weight 5.3 kg.
• Included: mattress repair kit and spare camera

Compressor technical parameters:

• With hinged hooks for easier hanging on the bed
• Low vibration, extremely quiet, noise level ≤ 20dB
• Air flow: 6-8l/min.
• Variable cycle duration: 12 min
• Adjustable pressure: 20 mmHg - 120 mmHg.
• Power consumption: 12VA.
• Fuse 0.5A
• Dimensions: 28x12x10 cm,
• Weight: ~1.15 kg
 

Warranty 24 months