Two-part transportation trolley ELEKTRA

Product description

Transport trolley with hydraulic height adjustment, HPL mattress platform and base with 5th electric motor central wheel.
The mattress platform consists of two parts made of x-ray-permeable HPL board. Also, the platform has four holes in the corners where the infusion stand can be inserted. Infusion stand with four stainless steel hooks. The maximum load of one hook is 1.25 kg. Adjustable height: 90.5 - 160 cm

The backrest is adjustable with a gas spring. Adjustment lever on the side of the head.
Wide x-ray conductive surface from the patient's head to the knees (150x47 cm). The x-ray cartridge holder is located in the space below the mattress platform on the head side. X-ray cartridge, sliding and locking.
Push handles on the head and foot sides allow operators to comfortably operate the cart. Push handles on the side of the head can be lowered using a lever on the side. The push handles on the side of the feet can be removed.
Folding side rails with quick lowering function. Railing with six pillars with a plastic top profile. The height of the railing is 39 cm from the mattress platform.

The stroller has side longitudinal bumper bars made of impact-resistant plastic. Four additional rubber bumper wheels on the four corners of the cart.
Under the bumper bar on both sides are metal accessory holders. Each accessory holder has two sliding and adjustable plastic hooks with a load capacity of 3 kg.
The structure of the trolley is made of coated steel. Reduced wheelbase on four rotating wheels is convenient for maneuvering in limited spaces.
The height is adjustable with two hydraulic telescopic columns. Three pedals on both sides of the wheelchair adjust height, trendelenburg and reverse-trendelenburg positions.

Easy-to-clean base frame with plastic cover. The plastic cover has:
• Compartment for an oxygen cylinder with a belt for oxygen bottles of various sizes (up to 7 liters);
• Bag for clothes;
Wheel base with antistatic system consisting of four wheels with brakes, diameter 200 mm. Non-lubricating wheels with brake control pedals located at the four corners of the base with the ability to lock/unlock four wheels simultaneously.
BIOCOTE® antibacterial, silver ion-based coating for all coated parts.

The electric fifth-wheel system is located in the center of the wheelbase and consists of a pair of wheels. This allows the patient to be transported completely safely and without any effort from the operator. The damping system allows you to maintain traction even on uneven surfaces and to overcome small obstacles up to 25 mm. The fifth wheel system is powered by a pair of batteries. Long-lasting and adequate power batteries ensure a long covering distance. The battery charger is integrated into the electrical system and powered by the mains voltage via the power cable. There is a cable reel system. The control unit, which activates the descent and movement of the wheel, is mounted on the side of the head. The operator control interface is realized through a membrane keyboard. The 5th wheel is lowered or raised using an electric power button. If the power cord of the wheelchair is still connected to the power outlet, the descent of the fifth wheel is blocked.

The steering device uses a very intuitive and sensitive controller, which allows you to control the speed of movement with great precision, even in small spaces. The control panel has an integrated compression sensor strip, which is activated when moving in reverse. This system is integrated to ensure operator safety. There is also an emergency button next to the controls that disconnects the power and activates a quick stop.
A fifth-wheel system designed with an electromechanical parking brake that ensures braking, stopping and restarting on ramps up to 10° under full load.
If the electric wheel fails, a lever on the base can be used to disconnect the wheel from the motor and operate the cart manually.
Multi-colored LED strips are installed on the base of the cart, which visually signal the status of the system and at the same time provide illumination in the transportation area of the cart.

One-piece static mattress with rounded edges made of fire-resistant polyurethane foam, (density 30 kg/m2), with attachment to the mattress platform.
Cover made of elastic polyester and polyurethane fabric, latex-free, phthalate-free, fire-resistant, antibacterial, antifungal, impermeable to liquids, breathable for water vapor (>= 500 g/mq). The elasticity allows to greatly reduce the friction of the surface with the patient's skin and guarantees the correct adaptation of the body
The lower part of the mattress is made of fire-resistant polyester-PVC fabric, which guarantees a non-slip effect. It is resistant to bending, abrasion, tearing and repetitive processes. Easy to remove thanks to the zipper, with a flap on three sides.