Four-part transportation trolley ELEKTRA

Product description

Hydraulic variable height transport trolley with HPL (Layered Laminate) mattress platform, radiation permeable and with 5th electric motor center wheel.

A four-piece mattress platform made of a radiation-permeable layered laminate attached to the mattress platform frame. Back and knee sections adjustable with gas spring levers. Fixed central section. Leg support part adjustable by gas spring and automatic synchronous adjustment. Wide radiation-permeable surface from the patient's head to the knees (150x47 cm). Below the platform, on the head side, can be placed (optionally) an X-ray cassette, which is slidable and self-locking, adjusted to the correct position with the handle control.

4 holes for the infusion stand at the 4 corners of the mattress platform.
The push handles on the head and foot side allow you to comfortably hold and push the stroller. Push handles near the head can be lowered with a side control. The push handles on the foot side can be removed and are equipped with a specially shaped hook with a bag holder function.
Folding side rails, quick lowering, on 6 posts, with top profile made of plastic, 36 cm high above the mattress platform. Under the bumper bar, the stretcher has a metal accessory holder (drains) on both sides, each with 2 sliding and repositionable plastic hooks with a holding capacity of 3 Kg each.

Variable height adjustment via two hydraulic telescopic columns controlled by three pedals on either side for height adjustment, trendelenburg and reverse-trendelenburg positions.
An easy-to-clean base frame with a surface made of some form of plastic material with accessories installed:
a compartment for an oxygen bottle, with a belt, of various dimensions (up to 7 liters); compartment for clothes (optional); two compartments for horizontal storage of infusion stand (optional) when not in use. Wheels with antistatic system, consisting of four wheels with brakes, diameter 200 mm, rotating on ball bearings, with brake pedal control and the possibility of locking/unlocking four wheels at the same time.

The fifth wheel with an electric traction system, controlled by a control unit, is located in the central part of the frame and consists of a pair of wheels called "24 V DC wheel motor with electric brake". This allows the patient to be transported completely safely and without any effort from the operator. Its damping system allows
maintain traction even on uneven surfaces and/or overcome small obstacles up to 25 mm.
It runs on a pair of batteries with long life and adequate power for a long range. The battery charger is integrated into the electrical system and powered from the power source via the power cord. There is a cable reel system.